Search results for "stim"

Key Features Rip stop feature Colour coded connectors Newly designed with a rip stop feature and colour coding on the connectors to easily distinguish between channels. Option: Channel 1

Read more less

Key Features Dual channel TENS and NMES 10 preset TENS programs 10 preset Neuromuscular Stimulation programs The Neurotrac Rehab TENS / EMS is a dual channel TENS and NMES device with remote switch controlled programs. 10 preset TENS programs, 10 preset Neuromuscular Stimulation programs. The wired remote switch control of mA by the patient (to speed up the neuro-muscular re-education) facilitates a range of rehabilitation protocols, including foot drop 2 customisable TENS and 1 customisable remote STIM program Lock mode function for measuring and recording home compliance (mA and total time used) Clear bright backlight LCD allows the display to be read more easily in low light or dark conditions Keypad with bigger buttons for ease of use Compact, light and reliable Technical Data: Dual channel: individually isolated circuits Amplitude: 0-90 mA into 500 Ohm load; indication only. Actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 70 mA, at 1500 Ohms load the maximum will be limited to 65 mA Type: constant current, maximum output voltage 180 Volts +10 / -30 Volts Waveform: asymmetrical, rectangular bi-phasic with zero DC current Selectable pulse width: 50 v¨S 450 ŒºS [2% accuracy] Pulse rate selection: in the continuous mode 2 200 Hz [2% accuracy] Mode: continuous, burst or modulated Burst mode: bursts of 9 pulses [200 ŒºS] at 150 Hz or 185 Hz, over 2 seconds Modulation mode: 6-second cycle of concurrent width modulation and pulse repetition rate modulation. TENS 7: Width starting at50 v¨S and increasing exponentially to 250ŒºS in 3 seconds and then returning back to 50 v¨S in the next 3 seconds. Rate starting 20 Hz, increasing exponentially to 85 Hz and then returning to 100 Hz. TENS 8: width fixed at 200 ŒºS. Rate starting 32 Hz, increasing exponentially to 100 Hz over 3 seconds and then returning to 32 Hz in the next 3 seconds Time duration of the custom programmes selectable: 1 minute to 12 hours Low battery indicator: If the battery goes below 6.9 volts +/- 0.2 volts the battery symbol will flash on/off once every second If the battery voltage is below 6.6 (+/- 0.2) volts the unit will not turn on. Open electrode detect: If an open circuit is detected at the output of channel A or B the output current will be reset at zero Physical Environmental conditions for storage & transport: -25 to +70 degrees centigrade. 15-93% humidity How to UseEnvironmental conditions for use: +5 to +40 degrees centigrade. 15-93% humidityDimensions 119.2 x 69 x 28.7mm Weight: 0.07kg without battery, 0.1kg with battery

Read more less